Terminology [EN] | Slides3

Homeslide

The Homeslide is the main starting point of the slider. Its navigation hash is "#Home". The homeslide has a different Layout and differs in Content.

Mainslide/vertical Slide

 A mainslide is a vertical slide of the slider. Scrolling down will always set the next vertical slide active and will ignore the current horizontal slide position.

Subslide/horizontal Slide

 A subslide is a horizontal slide of the slider. Each subslide has a mainslide as its parent.

Node

A node is a 360 ​​° image. The panorama tour consists of nodes that are connected by hotspots.

FOV

FOV (Field of View) describes the zoom variable of a node. This is given in °. The default value is 70. The lower the value, the closer you zoom in. The limit values ​​vary depending on the node and the image resolution, but are mostly between 5 and 100.

Tilt

Tilt describes the vertical alignment of a node. This is given in °. The limit values ​​are -90 to 90. At -90 ° you look into the ground and at 90 ° you look at the sky. At 0 ° just ahead.

Pan

Pan describes the horizontal alignment of a node. This is given in °. The limit values ​​are -360 to 360. The algebraic sign indicates the direction. + = clockwise, - = counterclockwise. +/- 90 ° is a quarter turn, +/- 180 ° is a half turn ...

Control

A control element is an input field in Elementor